lkml.org 
[lkml]   [2024]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH net v2] net: sparx5: fix wrong config being used when reconfiguring PCS
The wrong port config is being used if the PCS is reconfigured. Fix this
by correctly using the new config instead of the old one.

Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
---
Changes in v2:
- Rewrite subject and commit description
- Link to v1: https://lore.kernel.org/r/20240405-link-mode-reconfiguration-fix-v1-1-c1480bc2346a@microchip.com
---
drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
index 3a1b1a1f5a19..60dd2fd603a8 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
@@ -731,7 +731,7 @@ static int sparx5_port_pcs_low_set(struct sparx5 *sparx5,
bool sgmii = false, inband_aneg = false;
int err;

- if (port->conf.inband) {
+ if (conf->inband) {
if (conf->portmode == PHY_INTERFACE_MODE_SGMII ||
conf->portmode == PHY_INTERFACE_MODE_QSGMII)
inband_aneg = true; /* Cisco-SGMII in-band-aneg */
@@ -948,7 +948,7 @@ int sparx5_port_pcs_set(struct sparx5 *sparx5,
if (err)
return -EINVAL;

- if (port->conf.inband) {
+ if (conf->inband) {
/* Enable/disable 1G counters in ASM */
spx5_rmw(ASM_PORT_CFG_CSC_STAT_DIS_SET(high_speed_dev),
ASM_PORT_CFG_CSC_STAT_DIS,
---
base-commit: 1c25fe9a044d5334153a3585754b26553f8287b9
change-id: 20240305-link-mode-reconfiguration-fix-df961fef5505
Best regards,
--
Daniel Machon <daniel.machon@microchip.com>


\
 
 \ /
  Last update: 2024-05-27 16:30    [W:0.043 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site