lkml.org 
[lkml]   [2024]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/15] i2c: st: use 'time_left' variable with wait_for_completion_timeout()
Date
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-st.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index dbb93394ff94..5e01fe3dbb63 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -647,7 +647,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
{
struct st_i2c_client *c = &i2c_dev->client;
u32 ctl, i2c, it;
- unsigned long timeout;
+ unsigned long time_left;
int ret;

c->addr = i2c_8bit_addr_from_msg(msg);
@@ -685,11 +685,11 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STRTG);
}

- timeout = wait_for_completion_timeout(&i2c_dev->complete,
- i2c_dev->adap.timeout);
+ time_left = wait_for_completion_timeout(&i2c_dev->complete,
+ i2c_dev->adap.timeout);
ret = c->result;

- if (!timeout)
+ if (!time_left)
ret = -ETIMEDOUT;

i2c = SSC_I2C_STOPG | SSC_I2C_REPSTRTG;
--
2.43.0

\
 
 \ /
  Last update: 2024-04-27 22:38    [W:0.178 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site