lkml.org 
[lkml]   [2024]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 00/10] arm64: dts: imx8qm Add audio\flexcan\i2c\fec1 nodes for imx8qm-mek board
Date
No new warning added by 
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 CHECK_DTBS=y freescale/imx8qm-mek.dtb

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v4:
- Fix ">" at flexcan2 and flexcan3's pinctrl
- try best to keep order as label's alphabetically. Exited code have not
not order by label's alphabetically. iomux put to last to keep consistent
with other files
- fixe upercase in address in imx8qm-ss-audio.dtsi
- keep label's alphabetically in imx8qm-ss-audio.dtsi
- use name regulator-fec2-nvcc
- Link to v3: https://lore.kernel.org/r/20240422-dts_8qm_audio-v3-0-680cee731ced@nxp.com

Changes in v3:
- sensor use general name
- use tab in pinctrl
- remove extra space for fsl,asrc-rate
- change to bt_sco_codec: audio-codec-bt
- audio-routing = "Headphone Jack", "HP_L",
++ "Headphone Jack", "HP_R",
++ "Ext Spk", "SPK_LP",
++ "Ext Spk", "SPK_LN",
++ "Ext Spk", "SPK_RP",
++ "Ext Spk", "SPK_RN",
++ "LINPUT1", "Mic Jack",
++ "Mic Jack", "MICB";

- align clock under sai
- remove unused "FIXME: .."
- Link to v2: https://lore.kernel.org/r/20240418-dts_8qm_audio-v2-0-e40fe76b60a6@nxp.com

Changes in v2:
- move vendor property to last, just before status
- use audio-codec@1a as node name
- about dual license problem, need relicense whole included tree's dts file
which out scope this patch
- About delete-node

imx8qm-ss-audio.dtsi are not supposed to be included directly. imx8qm.dtsi
is supposed to be included by other board dts file.

in imx8qm.dtsi

/* sorted in register address */
+ #include "imx8-ss-audio.dtsi"
#include "imx8-ss-vpu.dtsi"
#include "imx8-ss-img.dtsi"
#include "imx8-ss-dma.dtsi"
@@ -473,3 +558,4 @@ drc_crit0: trip1 {
#include "imx8qm-ss-dma.dtsi"
#include "imx8qm-ss-conn.dtsi"
#include "imx8qm-ss-lsio.dtsi"
+#include "imx8qm-ss-audio.dtsi"
"imx8qm-ss-audio" will overwrite some common audio node in
"imx8-ss-audio.dtsi"

acm, and sai4/5 are defined in imx8-ss-audio.dtsi for common part for all
imx8qm\imx8qxp\imx8dxl.

- Link to v1: https://lore.kernel.org/r/20240415-dts_8qm_audio-v1-0-2976c35a0c52@nxp.com

---
Frank Li (10):
arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>;
arm64: dts: imx8qm-ss-audio: add audio nodes
arm64: dts: imx8qm-mek: add sai and wm8960 support
arm64: dts: imx8x: add cm41 subsystem dtsi
arm64: dts: imx8qm-mek: add i2c0 and children devices
arm64: dts: imx8qm-mek: add cm41_i2c and children devices
arm64: dts: imx8qm-mek: add flexcan support
arm64: dts: imx8qm-mek: add lsio mu5 and mu6
arm64: dts: imx8qm: add ocopt and fec_mac[0,1]
arm64: dts: imx8qm-mek: add fec2 support
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 1 -
arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi | 68 +++
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 344 +++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 102 +++++
5 files changed, 987 insertions(+), 1 deletion(-)
---
base-commit: eda9714fe6d9e6e5690992ce7dd42b13a5be7803
change-id: 20240402-dts_8qm_audio-e1e1697c9bf6
Best regards,
---
Frank Li <Frank.Li@nxp.com>

\
 
 \ /
  Last update: 2024-04-25 22:25    [W:0.096 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site