lkml.org 
[lkml]   [2024]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
On Mon, Apr 22, 2024 at 10:08:23PM +0200, Andrew Lunn wrote:
> > Testing Details:
> > ----------------
> > The driver performance was tested using iperf3 in the below two setups
> > separately.
> >
> > Setup 1:
> > --------
> > Node 0 - Raspberry Pi 4 with LAN8650 MAC-PHY
> > Node 1 - Raspberry Pi 4 with EVB-LAN8670-USB USB Stick
> >
> > Setup 2:
> > --------
> > Node 0 - SAMA7G54-EK with LAN8650 MAC-PHY
> > Node 1 - Raspberry Pi 4 with EVB-LAN8670-USB USB Stick
>
> Would it be possible to chain these two setups together by adding two
> USB dongles to one of the Ri 4s? If i remember correctly, there were
> reports of issues when two devices were using the framework at once.

Sorry, that makes no sense. Your USB device is unlikely to be doing
USB->SPI->MAC-PHY. Do you have two LAN8650 MAC-PHY you can connect to
one host?

Andrew

\
 
 \ /
  Last update: 2024-04-23 01:23    [W:1.675 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site