lkml.org 
[lkml]   [2024]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next v4 04/12] net: ethernet: oa_tc6: implement software reset
Date
Hi Andrew,

On 24/04/24 4:56 am, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
>> +static int oa_tc6_read_status0(struct oa_tc6 *tc6)
>> +{
>> + u32 regval;
>> + int ret;
>> +
>> + ret = oa_tc6_read_register(tc6, OA_TC6_REG_STATUS0, &regval);
>> + if (ret)
>> + return 0;
>
> If there is an error, your throw the error code away?
>
> It is a bit messy, since you are using this inside
> readx_poll_timeout(). I would probably do a netdev_warn() or similar,
> since it should not happen, and then return 0? I _think_ this is
> probably the first bus transaction we do, so if it fails, knowing the
> error code will help figuring out what is wrong with the SPI bus
> configuration.
OK, I will add the below print before "return 0;" in the next version.

dev_err(&tc6->spi->dev, "STATUS0 register read failed: %d\n", ret);

Best regards,
Parthiban V
>
> Andrew
>

\
 
 \ /
  Last update: 2024-04-26 08:39    [W:0.123 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site