lkml.org 
[lkml]   [2024]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectFAILED: Patch "PCI/AER: Block runtime suspend when handling errors" failed to apply to 4.19-stable tree
Date
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From 002bf2fbc00e5c4b95fb167287e2ae7d1973281e Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Date: Mon, 12 Feb 2024 13:01:35 +0100
Subject: [PATCH] PCI/AER: Block runtime suspend when handling errors

PM runtime can be done simultaneously with AER error handling. Avoid that
by using pm_runtime_get_sync() before and pm_runtime_put() after reset in
pcie_do_recovery() for all recovering devices.

pm_runtime_get_sync() will increase dev->power.usage_count counter to
prevent any possible future request to runtime suspend a device. It will
also resume a device, if it was previously in D3hot state.

I tested with igc device by doing simultaneous aer_inject and rpm
suspend/resume via /sys/bus/pci/devices/PCI_ID/power/control and can
reproduce:

igc 0000:02:00.0: not ready 65535ms after bus reset; giving up
pcieport 0000:00:1c.2: AER: Root Port link has been reset (-25)
pcieport 0000:00:1c.2: AER: subordinate device reset failed
pcieport 0000:00:1c.2: AER: device recovery failed
igc 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible

The problem disappears when this patch is applied.

Link: https://lore.kernel.org/r/20240212120135.146068-1-stanislaw.gruszka@linux.intel.com
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: <stable@vger.kernel.org>
---
drivers/pci/pcie/err.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 59c90d04a609a..705893b5f7b09 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -13,6 +13,7 @@
#define dev_fmt(fmt) "AER: " fmt

#include <linux/pci.h>
+#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -85,6 +86,18 @@ static int report_error_detected(struct pci_dev *dev,
return 0;
}

+static int pci_pm_runtime_get_sync(struct pci_dev *pdev, void *data)
+{
+ pm_runtime_get_sync(&pdev->dev);
+ return 0;
+}
+
+static int pci_pm_runtime_put(struct pci_dev *pdev, void *data)
+{
+ pm_runtime_put(&pdev->dev);
+ return 0;
+}
+
static int report_frozen_detected(struct pci_dev *dev, void *data)
{
return report_error_detected(dev, pci_channel_io_frozen, data);
@@ -207,6 +220,8 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
else
bridge = pci_upstream_bridge(dev);

+ pci_walk_bridge(bridge, pci_pm_runtime_get_sync, NULL);
+
pci_dbg(bridge, "broadcast error_detected message\n");
if (state == pci_channel_io_frozen) {
pci_walk_bridge(bridge, report_frozen_detected, &status);
@@ -251,10 +266,15 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
pcie_clear_device_status(dev);
pci_aer_clear_nonfatal_status(dev);
}
+
+ pci_walk_bridge(bridge, pci_pm_runtime_put, NULL);
+
pci_info(bridge, "device recovery successful\n");
return status;

failed:
+ pci_walk_bridge(bridge, pci_pm_runtime_put, NULL);
+
pci_uevent_ers(bridge, PCI_ERS_RESULT_DISCONNECT);

/* TODO: Should kernel panic here? */
--
2.43.0




\
 
 \ /
  Last update: 2024-05-27 16:12    [W:0.047 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site