lkml.org 
[lkml]   [2024]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 03/12] dt-bindings: mtd: brcmnand: Add ecc strap property
From


On 2/3/24 06:49, Conor Dooley wrote:
> On Fri, Feb 02, 2024 at 04:28:24PM -0800, William Zhang wrote:
>> Add brcm,nand-ecc-use-strap to get ecc and spare area size settings from
>> board boot strap for broadband board designs because they do not specify
>> ecc setting in dts but rather using the strap setting.
>>
>> Signed-off-by: William Zhang <william.zhang@broadcom.com>
>>
>> ---
>>
>> Changes in v4:
>> - Move ecc strap property to this separate patch and remove some
>> non-binding related text from the description
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>> Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
>> index d0168d55c73e..2599d902ec3a 100644
>> --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
>> @@ -147,6 +147,14 @@ patternProperties:
>> layout.
>> $ref: /schemas/types.yaml#/definitions/uint32
>>
>> + brcm,nand-ecc-use-strap:
>> + description:
>> + This flag indicates the ecc strength and spare area size should
>> + be retrieved from the SoC NAND boot strap setting instead of
>> + nand-ecc-strength and brcm,nand-oob-sector-size or auto detection.
>
> I'm still on the fence about this being overly prescriptive about the
> operating systems behaviour. I think it would be good to say why the
> strap values are better than those explicitly provided in DT rather than
> just saying "these strap values should be used".
>
This is a board/SoC design choice. I wouldn't advise it as better
choice as other board/SoC may not have that option. But definitively for
BCMBCA SoC board design, it is better and much easier and convenient
option than explicit dt setting. How about: This property provides a
choice for retrieving ecc strength and spare area size from the SoC NAND
boot strap setting. It is commonly used by the BCMBCA SoC board design.

>> + This is commonly used by the BCMBCA SoC board design.
>> + $ref: /schemas/types.yaml#/definitions/flag
>> +
>> unevaluatedProperties: false
>>
>> allOf:
>> --
>> 2.37.3
>>
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2024-05-27 14:47    [W:0.176 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site