lkml.org 
[lkml]   [2024]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2] net: stmmac: dwmac-qcom-ethqos: Update link clock rate only for RGMII
Date
Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).

Signed-off-by: Sarosh Hasan <quic_sarohasa@quicinc.com>
---
v2 changelog:
- Addressed Konrad Dybcio comment on optimizing the patch
---
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 31631e3f89d0..c182294a6515 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -169,6 +169,9 @@ static void rgmii_dump(void *priv)
static void
ethqos_update_link_clk(struct qcom_ethqos *ethqos, unsigned int speed)
{
+ if (!phy_interface_mode_is_rgmii(ethqos->phy_mode))
+ return;
+
switch (speed) {
case SPEED_1000:
ethqos->link_clk_rate = RGMII_1000_NOM_CLK_FREQ;
--
2.17.1

\
 
 \ /
  Last update: 2024-05-27 15:21    [W:0.221 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site