lkml.org 
[lkml]   [2024]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v7] dt-bindings: iio: humidity: hdc20x0: add optional interrupts property
HDC2010 and HDC2080 humidity sensors both have an interrupt / data-ready
signal which can be used for signaling to the host.

Add binding for "interrupts" property so that boards wiring this signal
may describe the connection.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v7:
- split out of original patchset because it should go via iio tree
- collected acked-by Rob Herring from v6
- Link to v6: https://lore.kernel.org/r/20240212-add-am64-som-v6-0-b59edb2bc8c3@solid-run.com
---
Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index 79e75a8675cb..e3eca8917517 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -27,6 +27,9 @@ properties:
reg:
maxItems: 1

+ interrupts:
+ maxItems: 1
+
required:
- compatible
- reg
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240219-iio-hdc20x0-interrupt-binding-42307b7b99b5
Best regards,
--
Josua Mayer <josua@solid-run.com>


\
 
 \ /
  Last update: 2024-05-27 15:10    [W:0.251 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site