lkml.org 
[lkml]   [2024]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 12/13] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor
From
On 15/02/2024 17:52, Théo Lebrun wrote:
> Declare the temperature sensor on I2C bus 2. Its label is the schematics
> identifier.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
> arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> index 6898b2d8267d..1f8549acd40d 100644
> --- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> +++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> @@ -21,3 +21,11 @@ memory@0 {
> <0x8 0x02000000 0x0 0x7E000000>;
> };
> };
> +
> +&i2c2 {
> + tmp112@48 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation


temperature-sensor, power-sensor etc.

Best regards,
Krzysztof


\
 
 \ /
  Last update: 2024-05-27 15:06    [W:0.275 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site