lkml.org 
[lkml]   [2023]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[[RFC PATCH v4 net-next] 0/2] net: dsa: hsr: Enable HSR HW offloading for KSZ9477
Date
This patch series provides support for HSR HW offloading in KSZ9477
switch IC.

To test this feature:
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link set dev lan1 up
ip link set dev lan2 up
ip a add 192.168.0.1/24 dev hsr0
ip link set dev hsr0 up

To remove HSR network device:
ip link del hsr0

It is also possible to create another HSR interface, but it will
only support HSR is software - e.g.
ip link add name hsr1 type hsr slave1 lan3 slave2 lan4 supervision 45 version 1

Test HW:
Two KSZ9477-EVB boards with HSR ports set to "Port1" and "Port2".

Performance SW used:
nuttcp -S --nofork
nuttcp -vv -T 60 -r 192.168.0.2
nuttcp -vv -T 60 -t 192.168.0.2

Code: v6.5-rc7 Linux repository
Tested HSR v0 and v1
Results:
With KSZ9477 offloading support added: RX: 100 Mbps TX: 98 Mbps
With no offloading RX: 63 Mbps TX: 63 Mbps


Lukasz Majewski (2):
net: dsa: Extend ksz9477 TAG setup to support HSR frames duplication
net: dsa: hsr: Enable in KSZ9477 switch HW HSR offloading

drivers/net/dsa/microchip/ksz9477.c | 81 ++++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz9477.h | 2 +
drivers/net/dsa/microchip/ksz_common.c | 76 ++++++++++++++++++++++++
drivers/net/dsa/microchip/ksz_common.h | 3 +
net/dsa/tag_ksz.c | 8 +++
5 files changed, 170 insertions(+)

--
2.20.1

\
 
 \ /
  Last update: 2023-09-06 17:28    [W:2.779 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site