lkml.org 
[lkml]   [2023]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC net-next v1 1/2] dt-bindings: net: dsa: microchip: Update ksz device tree bindings for drive strength
Date
Extend device tree bindings to support drive strength configuration for the
ksz* switches. Introduced properties:
- microchip,hi-drive-strength-microamp: Controls the drive strength for
high-speed interfaces like GMII/RGMII and more.
- microchip,lo-drive-strength-microamp: Governs the drive strength for
low-speed interfaces such as LEDs, PME_N, and others.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
.../bindings/net/dsa/microchip,ksz.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index e51be1ac03623..97d655eb01b6f 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -49,6 +49,22 @@ properties:
Set if the output SYNCLKO clock should be disabled. Do not mix with
microchip,synclko-125.

+ microchip,hi-drive-strength-microamp:
+ description:
+ High Speed Drive Strength. Controls drive strength of GMII / RGMII /
+ MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines.
+ minimum: 2000
+ maximum: 28000
+ default: 24000
+
+ microchip,lo-drive-strength-microamp:
+ description:
+ Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI,
+ COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines.
+ minimum: 2000
+ maximum: 28000
+ default: 8000
+
required:
- compatible
- reg
--
2.39.2
\
 
 \ /
  Last update: 2023-09-05 18:04    [W:0.790 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site