lkml.org 
[lkml]   [2023]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] riscv: dts: starfive: Add VisionFive 2 PHY supplies
Date
I checked the schematics to see what power supplies are needed.
This allows for using ethernet without other drivers enabled
that would coincidentally enable the same power supply. ⚡

Signed-off-by: Daniel Maslowski <cyrevolt@gmail.com>
---
.../boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
index d4ea4a2c0b9b..bc1ac12bc71b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -16,12 +16,14 @@ &gmac0 {
starfive,tx-use-rgmii-clk;
assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+ phy-supply = <&vcc_3v3>;
};

&gmac1 {
starfive,tx-use-rgmii-clk;
assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>;
assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+ phy-supply = <&vcc_3v3>;
};

&phy0 {
--
2.34.1
\
 
 \ /
  Last update: 2023-09-23 17:27    [W:0.052 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site