lkml.org 
[lkml]   [2023]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/3] gnss: ubx: add support for the reset gpio
On Sat, Aug 19, 2023 at 10:56 PM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
> Tested with a Renesas KingFisher board. Because my GNSS device is hooked
> up via UART and I2C simultaneously, I could verify functionality by
> opening/closing the GNSS device using UART and see if the corresponding
> I2C device was visible on the bus.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>
> Changes since v1:
> * proper reverse order in ubx_set_standby (Thanks, Geert!)
> * simplified the comment when initiall asserting the GPIO (Thanks, Geert!)

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2023-09-19 13:23    [W:0.083 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site