lkml.org 
[lkml]   [2023]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] ALSA: docs: Add Marian M2 driver documentation
Date
Add documentation for the new MARIAN Seraph M2 sound card. It covers
current development status, available controls of the card and
information about the integrated loopback.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
---
V1 -> V2:
- Remove redundant documentation fix from the next patch in the series

Documentation/sound/cards/index.rst | 1 +
Documentation/sound/cards/marian-m2.rst | 104 ++++++++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 Documentation/sound/cards/marian-m2.rst

diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst
index e68bbb13c384..e873592d8d00 100644
--- a/Documentation/sound/cards/index.rst
+++ b/Documentation/sound/cards/index.rst
@@ -19,3 +19,4 @@ Card-Specific Information
serial-u16550
img-spdif-in
pcmtest
+ marian-m2
diff --git a/Documentation/sound/cards/marian-m2.rst b/Documentation/sound/cards/marian-m2.rst
new file mode 100644
index 000000000000..bf12445e20d7
--- /dev/null
+++ b/Documentation/sound/cards/marian-m2.rst
@@ -0,0 +1,104 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+MARIAN Seraph M2 Driver
+=======================
+
+Sep 18, 2023
+
+Ivan Orlov <ivan.orlov0322@gmail.com>
+
+STATE OF DEVELOPMENT
+====================
+
+This driver is based on the driver written by Florian Faber in 2012, which seemed to work fine.
+However, the initial code contained multiple issues, which had to be solved before sending the
+driver upstream.
+
+The vendor lost the full documentation, so what we have here was recovered from drafts and found
+after experiments with the card.
+
+What seems to be working fine:
+- Playback and capture for all supported rates
+- Integrated loopback (with some exceptions, see below)
+
+MEMORY MODEL
+============
+
+The hardware requires one huge contiguous DMA space to be allocated. After allocation, the bus address of
+this buffer should be written to the hardware register.
+
+We can split this space into two parts: the first one contains samples for capture, another one contains
+play samples:
+
+CAPTURE_CH_0, CAPTURE_CH_1, ..., CAPTURE_CH_127 | PLAY_CH_0, PLAY_CH_1, ..., PLAY_CH_127
+
+The card supports the non-interleaved access mode only, so samples for each channel lay together:
+
+C0, C0, ..., C0, C1, C1, ..., C1, ..., C127 | C0, C0, ..., C0, C1, C1, ..., C1, ..., C127
+
+The count of samples per each channel buffer needs to be set explicitly, so the address of the first
+byte of the playback data depends on this value. The playback buffer starts where the capture buffer ends.
+It makes the arbitrary period count/buffer size feature impossible to implement, and the driver supports only
+2 periods per buffer.
+
+Controls
+========
+
+Input 1 Sync
+ 0 - No signal, 1 - valid MADI signal found, 2 - Synced with MADI signal
+Input 2 Sync
+ 0 - No signal, 1 - valid MADI signal found, 2 - Synced with MADI signal
+
+Input 1 Channel Mode
+ 0 - 56 channels, 1 - 64 channels
+Input 2 Channel Mode
+ 0 - 56 channels, 1 - 64 channels
+
+Input 1 Frame Mode
+ 0 - 48 kHz, 1 - 96 kHz
+Input 2 Frame Mode
+ 0 - 48 kHz, 1 - 96 kHz
+
+Input 1 Frequency
+ Measured frequency on Input 1
+Input 2 Frequency
+ Measured frequency on Input 2
+
+Output 1 Channel Mode
+ 0 - 56 channels, 1 - 64 channels
+Output 2 Channel Mode
+ 0 - 56 channels, 1 - 64 channels
+
+Output 1 Frame Mode
+ 0 - 48 kHz, 1 - 96 kHz
+Output 2 Frame Mode
+ 0 - 48 kHz, 1 - 96 kHz
+
+Clock Source
+ Internal/Sync Bus, Input Port 1, Input Port 2
+
+Speed mode
+ VCO clock range (slow/fast)
+
+DCO Frequency (Hz)
+
+DCO Frequency (ms)
+
+DCO Detune
+ Range: -200...200
+
+Loopback
+ Enable/Disable integrated loopback
+
+
+Loopback
+========
+
+The card contains integrated loopback. When it is enabled, it sets the hardware’s DAW-in memory pointer
+to the hardware’s DAW-out memory. So, what you play is what you record.
+
+You can enable the integrated loopback using the corresponding control.
+
+The loopback seems to work well on lower rates (like 28000). However, when the rate goes higher, I observe
+multiple mistakes in recorded byte ordering.
--
2.34.1
\
 
 \ /
  Last update: 2023-09-18 20:13    [W:0.120 / U:1.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site