lkml.org 
[lkml]   [2023]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] ASoC: wm8782: Allow higher audio rates
Date
The wm8782 supports higher audio rates than just 48kHz. This is
configured by setting the FSAMPEN pin on the codec chip.

This patch series introduces the 'wlf,fsampen' device tree property
to indicate the pin status and control the maximum rate available
when using the codec.

v2 -> v3:
- Rate is now properly constrained using ALSA constraints

v1 -> v2:
- Switched from max-rate property to wlf,fsampen property
- Clarified property is optional, not required

John Watts (3):
ASoC: wm8782: Constrain maximum audio rate at runtime
ASoC: wm8782: Use wlf,fsampen device tree property
ASoC: dt-bindings: wlf,wm8782: Add wlf,fsampen property

.../devicetree/bindings/sound/wm8782.txt | 5 ++
sound/soc/codecs/wm8782.c | 63 +++++++++++++++----
2 files changed, 55 insertions(+), 13 deletions(-)

--
2.42.0

\
 
 \ /
  Last update: 2023-09-17 19:40    [W:0.033 / U:25.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site