lkml.org 
[lkml]   [2023]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] usb: typec: tps6598x: add reset gpio support
Date
The TPS6598x PD controller provides an active-high hardware reset input
that reinitializes all device settings. If it is not grounded by
design, the driver must be able to de-assert it in order to initialize
the device.

This series adds and documents the reset signal management. It also
includes the basic reset management for initialization and
suspend/resume control.

Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
---
Changes in v2:
- core.c: minor coding style correction ({} in 'else' after 'if {}')
- ti,tps6598x.yaml: reference to the device instead of the driver in
the commit message.
- Link to v1: https://lore.kernel.org/r/20230912-topic-tps6598x_reset-v1-0-78dc0bf61790@wolfvision.net

---
Javier Carrasco (2):
usb: typec: tps6598x: add reset gpio support
dt-bindings: usb: tps6598x: add reset-gpios property

.../devicetree/bindings/usb/ti,tps6598x.yaml | 6 ++++++
drivers/usb/typec/tipd/core.c | 20 ++++++++++++++++++++
2 files changed, 26 insertions(+)
---
base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d
change-id: 20230912-topic-tps6598x_reset-55e9494e8649

Best regards,
--
Javier Carrasco <javier.carrasco@wolfvision.net>

\
 
 \ /
  Last update: 2023-09-15 14:24    [W:0.054 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site