lkml.org 
[lkml]   [2023]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 2/6] dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
From: Peng Fan <peng.fan@nxp.com>

i.MX8ULP and i.MX93 actually has two interrupts for each gpio
controller, one for Trustzone non-secure world, one for secure world.

And they has one register based, not two as i.MX7ULP or VF610.

Although the Linux Kernel driver gpio-vf610.c could work with
fsl,imx7ulp-gpio compatible, it is based on some tricks did in
device tree with some offset added to base address.

So actually i.MX8ULP/i.MX93 is not compatible with i.MX7ULP.

Last, i.MX93 is directly derived from i.MX8ULP, so make i.MX93 GPIO
compatible with i.MX8ULP

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
.../devicetree/bindings/gpio/gpio-vf610.yaml | 41 +++++++++++++++++++---
1 file changed, 37 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
index 59427d97adf5..8c1f87a1a393 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -20,6 +20,7 @@ description: |
properties:
compatible:
oneOf:
+ - const: fsl,imx8ulp-gpio
- const: fsl,vf610-gpio
- items:
- const: fsl,imx7ulp-gpio
@@ -27,16 +28,21 @@ properties:
- items:
- enum:
- fsl,imx93-gpio
- - fsl,imx8ulp-gpio
- - const: fsl,imx7ulp-gpio
+ - const: fsl,imx8ulp-gpio

reg:
description: The first reg tuple represents the PORT module, the second tuple
represents the GPIO module.
- maxItems: 2
+ items:
+ - description: PORT register base address
+ - description: GPIO register base address
+ minItems: 1

interrupts:
- maxItems: 1
+ items:
+ - description: GPIO Trustzone non-secure interrupt number
+ - description: GPIO Trustzone secure interrupt number
+ minItems: 1

interrupt-controller: true

@@ -78,6 +84,33 @@ required:
- "#gpio-cells"
- gpio-controller

+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,vf610-gpio
+ - fsl,imx7ulp-gpio
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: GPIO interrupt number
+ reg:
+ items:
+ - description: PORT register base address
+ - description: GPIO register base address
+ else:
+ properties:
+ interrupts:
+ items:
+ - description: GPIO Trustzone non-secure interrupt number
+ - description: GPIO Trustzone secure interrupt number
+ reg:
+ items:
+ - description: GPIO register base address
+
additionalProperties: false

examples:
--
2.37.1

\
 
 \ /
  Last update: 2023-09-16 04:01    [W:0.090 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site