Messages in this thread Patch in this message | | | From | Shrikanth Hegde <> | Subject | [PATCH v2] sched/topology: remove sysctl_sched_energy_aware depending on the architecture | Date | Fri, 1 Sep 2023 12:21:10 +0530 |
| |
Currently sysctl_sched_energy_aware doesn't alter the said behaviour on some of the architectures. IIUC its meant to either force rebuild the perf domains or cleanup the perf domains by echoing 1 or 0 respectively.
perf domains are not built when there is SMT, or when there is no Asymmetric CPU topologies or when there is no frequency invariance. Since such cases EAS is not set and perf domains are not built. By changing the values of sysctl_sched_energy_aware, its not possible to force build the perf domains. Hence remove this sysctl on such platforms that dont support it. Some of the settings can be changed later such as smt_active by offlining the CPU's, In those cases if build_perf_domains returns true, re-enable the sysctl.
Anytime, when sysctl_sched_energy_aware is changed sched_energy_update is set when building the perf domains. Making use of that to find out if the change is happening by sysctl or dynamic system change.
Taking different cases: Case1. system while booting has EAS capability, sysctl will be set 1. Hence perf domains will be built if needed. On changing the sysctl to 0, since sched_energy_update is true, perf domains would be freed and sysctl will not be removed. later sysctl is changed to 1, enabling the perf domains rebuild again. Since sysctl is already there, it will skip register.
Case2. System while booting doesn't have EAS Capability. Later after system change it becomes capable of EAS. sched_energy_update is false. Though sysctl is 0, will go ahead and try to enable eas. This is the current behaviour. if has_eas is true, then sysctl will be registered. After that any sysctl change is same as Case1.
Case3. System becomes not capable of EAS due to system change. Here since sched_energy_update is false, build_perf_domains return has_eas as false due to one of the checks and Since this is dynamic change remove the sysctl. Any further change which enables EAS is Case2
Note: This hasn't been tested on platform which supports EAS. If the change can be verified on that it would really help. This has been tested on power10 which doesn't support EAS. sysctl_sched_energy_aware is removed with patch.
changes since v1: Chen Yu had pointed out that this will not destroy the perf domains on architectures where EAS is supported by changing the sysctl. This patch addresses that. [v1] Link: https://lore.kernel.org/lkml/20230829065040.920629-1-sshegde@linux.vnet.ibm.com/#t
Signed-off-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com> --- kernel/sched/topology.c | 45 +++++++++++++++++++++++++++++++++-------- 1 file changed, 37 insertions(+), 8 deletions(-)
diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 05a5bc678c08..4d16269ac21a 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -208,7 +208,8 @@ sd_parent_degenerate(struct sched_domain *sd, struct sched_domain *parent)
#if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) DEFINE_STATIC_KEY_FALSE(sched_energy_present); -static unsigned int sysctl_sched_energy_aware = 1; +static unsigned int sysctl_sched_energy_aware; +static struct ctl_table_header *sysctl_eas_header; static DEFINE_MUTEX(sched_energy_mutex); static bool sched_energy_update;
@@ -226,6 +227,7 @@ static int sched_energy_aware_handler(struct ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { int ret, state; + int prev_val = sysctl_sched_energy_aware;
if (write && !capable(CAP_SYS_ADMIN)) return -EPERM; @@ -233,8 +235,11 @@ static int sched_energy_aware_handler(struct ctl_table *table, int write, ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); if (!ret && write) { state = static_branch_unlikely(&sched_energy_present); - if (state != sysctl_sched_energy_aware) + if (state != sysctl_sched_energy_aware && prev_val != sysctl_sched_energy_aware) { + if (sysctl_sched_energy_aware && !state) + pr_warn("Attempt to build energy domains when EAS is disabled\n"); rebuild_sched_domains_energy(); + } }
return ret; @@ -255,7 +260,14 @@ static struct ctl_table sched_energy_aware_sysctls[] = {
static int __init sched_energy_aware_sysctl_init(void) { - register_sysctl_init("kernel", sched_energy_aware_sysctls); + int cpu = cpumask_first(cpu_active_mask); + + if (sched_smt_active() || !per_cpu(sd_asym_cpucapacity, cpu) || + !arch_scale_freq_invariant()) + return 0; + + sysctl_eas_header = register_sysctl("kernel", sched_energy_aware_sysctls); + sysctl_sched_energy_aware = 1; return 0; }
@@ -336,10 +348,28 @@ static void sched_energy_set(bool has_eas) if (sched_debug()) pr_info("%s: stopping EAS\n", __func__); static_branch_disable_cpuslocked(&sched_energy_present); +#ifdef CONFIG_PROC_SYSCTL + /* + * if the architecture supports EAS and forcefully + * perf domains are destroyed, there should be a sysctl + * to enable it later. If this was due to dynamic system + * change such as SMT<->NON_SMT then remove sysctl. + */ + if (sysctl_eas_header && !sched_energy_update) { + unregister_sysctl_table(sysctl_eas_header); + sysctl_eas_header = NULL; + } +#endif + sysctl_sched_energy_aware = 0; } else if (has_eas && !static_branch_unlikely(&sched_energy_present)) { if (sched_debug()) pr_info("%s: starting EAS\n", __func__); static_branch_enable_cpuslocked(&sched_energy_present); +#ifdef CONFIG_PROC_SYSCTL + if (!sysctl_eas_header) + sysctl_eas_header = register_sysctl("kernel", sched_energy_aware_sysctls); +#endif + sysctl_sched_energy_aware = 1; } }
@@ -380,15 +410,14 @@ static bool build_perf_domains(const struct cpumask *cpu_map) struct cpufreq_policy *policy; struct cpufreq_governor *gov;
- if (!sysctl_sched_energy_aware) + if (!sysctl_sched_energy_aware && sched_energy_update) goto free;
/* EAS is enabled for asymmetric CPU capacity topologies. */ if (!per_cpu(sd_asym_cpucapacity, cpu)) { - if (sched_debug()) { - pr_info("rd %*pbl: CPUs do not have asymmetric capacities\n", - cpumask_pr_args(cpu_map)); - } + if (sched_debug()) + pr_info("rd %*pbl: Disabling EAS, CPUs do not have asymmetric capacities\n", + cpumask_pr_args(cpu_map)); goto free; }
-- 2.31.1
| |