lkml.org 
[lkml]   [2023]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] dma: add dma mask interface in probe
Date
In the probe of DMA, the default addressing range is 32 bits,
while the actual DMA hardware addressing range used is 36 bits.
So add dma_set_mask_and_coherent function to match DMA
addressing range.

Signed-off-by: Kaiwei Liu <kaiwei.liu@unisoc.com>
---
drivers/dma/sprd-dma.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 20c3cb1ef2f5..0e146550dfbb 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -1115,6 +1115,15 @@ static int sprd_dma_probe(struct platform_device *pdev)
u32 chn_count;
int ret, i;

+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
+ if (ret) {
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "dma_set_mask_and_coherent failed\n");
+ return ret;
+ }
+ }
+
/* Parse new and deprecated dma-channels properties */
ret = device_property_read_u32(&pdev->dev, "dma-channels", &chn_count);
if (ret)
--
2.17.1
\
 
 \ /
  Last update: 2023-08-07 07:21    [W:0.034 / U:1.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site