lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] serial: 8250_dw: Fix assignment error of data in dw8250_probe()
On Fri, 4 Aug 2023, Xia Fukun wrote:

> When the "ri-override" property is present in the device,
> data->msr_mask_on and UART_MSR_RI should be used for
> OR-assignment. Fix the errors in it.
>
> Fixes: 1bd8edba10e6 ("serial: 8250_dw: adapt to unified device property interface")
> Signed-off-by: Xia Fukun <xiafukun@huawei.com>
> ---
> drivers/tty/serial/8250/8250_dw.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index 7db51781289e..921b5f07828f 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -587,7 +587,7 @@ static int dw8250_probe(struct platform_device *pdev)
>
> if (device_property_read_bool(dev, "ri-override")) {
> /* Always report Ring indicator as inactive */
> - data->msr_mask_off |= UART_MSR_RI;
> + data->msr_mask_on |= UART_MSR_RI;
> data->msr_mask_off |= UART_MSR_TERI;

The comment and also documentation says RI signal is always kept inactive
when ri-override is present.

In Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml:

ri-override:
description: Override the RI modem status signal. This signal will always
be reported as inactive instead of being obtained from the modem status
register. Define this if your serial port does not use this pin.

...So why you think this patch is correct? (Please explain it in the v2
changelog clearly if you think your patch is still correct thing to do,
thank you).


--
i.

\
 
 \ /
  Last update: 2023-08-04 14:25    [W:0.025 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site