lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3/4] drm/bridge: lt8912b: Manually disable HPD only if it was enabled
lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when calling
drm_bridge_hpd_disable() it misses checking if a connector was created,
calling drm_bridge_hpd_disable() even if HPD was nenver enabled. I don't
see any issues causing by this wrong call, though.

Add the check to avoid wrongly calling drm_bridge_hpd_disable().

Fixes: 3b0a01a6a522 ("drm/bridge: lt8912b: Add hot plug detection")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
drivers/gpu/drm/bridge/lontium-lt8912b.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/lontium-lt8912b.c b/drivers/gpu/drm/bridge/lontium-lt8912b.c
index 2d752e083433..9ee639e75a1c 100644
--- a/drivers/gpu/drm/bridge/lontium-lt8912b.c
+++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c
@@ -587,7 +587,7 @@ static void lt8912_bridge_detach(struct drm_bridge *bridge)

lt8912_hard_power_off(lt);

- if (lt->hdmi_port->ops & DRM_BRIDGE_OP_HPD)
+ if (lt->connector.dev && lt->hdmi_port->ops & DRM_BRIDGE_OP_HPD)
drm_bridge_hpd_disable(lt->hdmi_port);
}

--
2.34.1

\
 
 \ /
  Last update: 2023-08-04 12:51    [W:0.056 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site