lkml.org 
[lkml]   [2023]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v8 04/13] coresight-tpda: Add DSB dataset support
From
On 22/08/2023 06:26, Tao Zhang wrote:
> Read the DSB element size from the device tree. Set the register
> bit that controls the DSB element size of the corresponding port.
>
> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
> ---
> drivers/hwtracing/coresight/coresight-tpda.c | 126 ++++++++++++++++++++++++---
> drivers/hwtracing/coresight/coresight-tpda.h | 2 +
> 2 files changed, 118 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c
> index 8d2b9d2..0f21cd1 100644
> --- a/drivers/hwtracing/coresight/coresight-tpda.c
> +++ b/drivers/hwtracing/coresight/coresight-tpda.c
> @@ -21,6 +21,80 @@
>
> DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda");
>
> +static bool coresight_device_is_tpdm(struct coresight_device *csdev)
> +{
> + return (csdev->type == CORESIGHT_DEV_TYPE_SOURCE) &&
> + (csdev->subtype.source_subtype ==

minor nit: Please align

return (csdev->type == CORESIGHT_DEV_TYPE_SOURCE) &&
(csdev->subtype.source_subtype ==
> + CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM);


> +}
> +
> +/*
> + * Read the DSB element size from the TPDM device
> + * Returns
> + * The dsb element size read from the devicetree if available.
> + * 0 - Otherwise, with a warning once.
> + */
> +static int tpdm_read_dsb_element_size(struct coresight_device *csdev)
> +{
> + int rc = 0;
> + u8 size = 0;
> +
> + rc = fwnode_property_read_u8(dev_fwnode(csdev->dev.parent),
> + "qcom,dsb-element-size", &size);
> + if (rc)
> + dev_warn_once(&csdev->dev,
> + "Failed to read TPDM DSB Element size: %d\n", rc);
> +
> + return size;
> +}
> +
> +/*
> + * Search and read element data size from the TPDM node in
> + * the devicetree. Each input port of TPDA is connected to
> + * a TPDM. Different TPDM supports different types of dataset,
> + * and some may support more than one type of dataset.
> + * Parameter "inport" is used to pass in the input port number
> + * of TPDA, and it is set to -1 in the recursize call.
> + */
> +static int tpda_get_element_size(struct coresight_device *csdev,
> + int inport)

nit: Again, please align.

static int tpda_get_element_size(struct coresight_device *csdev,
int inport)
{


> +{
> + int dsb_size = -ENOENT;
> + int i, size;
> + struct coresight_device *in;
> +
> + for (i = 0; i < csdev->pdata->nr_inconns; i++) {
> + in = csdev->pdata->in_conns[i]->src_dev;
> + if (!in)
> + continue;
> +
> + /* Ignore the paths that do not match port */
> + if (inport > 0 &&
> + (csdev->pdata->in_conns[i]->dest_port != inport))

Align please :

if (inport > 0 &&
(csdev->pdata->in_conns[i]->dest_port != inport))

> + continue;
> +
> + if (coresight_device_is_tpdm(in)) {
> + size = tpdm_read_dsb_element_size(in);
> + } else {
> + /* Recurse down the path */
> + size = tpda_get_element_size(in, -1);
> + }
> +
> + if (size < 0)
> + return size;
> +
> + if (dsb_size < 0) {
> + /* Found a size, save it. */
> + dsb_size = size;
> + } else {
> + /* Found duplicate TPDMs */
> + return -EEXIST;
> + }
> + }
> +
> + return dsb_size;
> +}
> +
> /* Settings pre enabling port control register */
> static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
> {
> @@ -32,26 +106,55 @@ static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
> writel_relaxed(val, drvdata->base + TPDA_CR);
> }
>
> -static void tpda_enable_port(struct tpda_drvdata *drvdata, int port)
> +static int tpda_enable_port(struct tpda_drvdata *drvdata, int port)
> {
> u32 val;
> + int size;
>
> val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
> + /*
> + * Configure aggregator port n DSB data set element size
> + * Set the bit to 0 if the size is 32
> + * Set the bit to 1 if the size is 64
> + */
> + size = tpda_get_element_size(drvdata->csdev, port);
> + switch (size) {
> + case 32:
> + val &= ~TPDA_Pn_CR_DSBSIZE;
> + break;
> + case 64:
> + val |= TPDA_Pn_CR_DSBSIZE;
> + break;
> + case 0:
> + return -EEXIST;
> + case -EEXIST:
> + dev_warn_once(&drvdata->csdev->dev,
> + "Detected multiple TPDMs on port %d", -EEXIST);
> + return -EEXIST;
> + default:
> + return -EINVAL;
> + }
> +
> /* Enable the port */
> val |= TPDA_Pn_CR_ENA;
> writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
> +
> + return 0;
> }
>
> -static void __tpda_enable(struct tpda_drvdata *drvdata, int port)
> +static int __tpda_enable(struct tpda_drvdata *drvdata, int port)
> {
> + int ret;
> +
> CS_UNLOCK(drvdata->base);
>
> if (!drvdata->csdev->enable)
> tpda_enable_pre_port(drvdata);
>
> - tpda_enable_port(drvdata, port);
> -
> + ret = tpda_enable_port(drvdata, port);
> CS_LOCK(drvdata->base);
> +
> + return ret;
> }
>
> static int tpda_enable(struct coresight_device *csdev,
> @@ -59,16 +162,19 @@ static int tpda_enable(struct coresight_device *csdev,
> struct coresight_connection *out)
> {
> struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
> + int ret;

As reported by the build robot, please initialise this to 0.

>
> spin_lock(&drvdata->spinlock);
> - if (atomic_read(&in->dest_refcnt) == 0)
> - __tpda_enable(drvdata, in->dest_port);
> + if (atomic_read(&in->dest_refcnt) == 0) {
> + ret = __tpda_enable(drvdata, in->dest_port);
> + if (!ret) {
> + atomic_inc(&in->dest_refcnt);
> + dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", in->dest_port);
> + }
> + }
>
> - atomic_inc(&in->dest_refcnt);
> spin_unlock(&drvdata->spinlock);
> -
> - dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", in->dest_port);
> - return 0;
> + return ret;
> }
>
> static void __tpda_disable(struct tpda_drvdata *drvdata, int port)
> diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h
> index 0399678..b3b38fd 100644
> --- a/drivers/hwtracing/coresight/coresight-tpda.h
> +++ b/drivers/hwtracing/coresight/coresight-tpda.h
> @@ -10,6 +10,8 @@
> #define TPDA_Pn_CR(n) (0x004 + (n * 4))
> /* Aggregator port enable bit */
> #define TPDA_Pn_CR_ENA BIT(0)
> +/* Aggregator port DSB data set element size bit */
> +#define TPDA_Pn_CR_DSBSIZE BIT(8)
>
> #define TPDA_MAX_INPORTS 32
>

Rest looks fine to me.

Suzuki

\
 
 \ /
  Last update: 2023-08-31 17:53    [W:0.243 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site