Messages in this thread Patch in this message | | | From | Naresh Solanki <> | Subject | [PATCH 1/3] regulator: Add uapi header | Date | Thu, 31 Aug 2023 14:14:08 +0200 |
| |
Add UAPI header for regulator. Include regulator events in the header.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> --- include/linux/regulator/consumer.h | 47 +-------------------------- include/uapi/linux/regulator.h | 52 ++++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+), 46 deletions(-) create mode 100644 include/uapi/linux/regulator.h
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 39b666b40ea6..fb65cf35beca 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -33,6 +33,7 @@ #include <linux/err.h> #include <linux/suspend.h> +#include <uapi/linux/regulator.h> struct device; struct notifier_block; @@ -84,52 +85,6 @@ struct regulator_dev; #define REGULATOR_MODE_IDLE 0x4 #define REGULATOR_MODE_STANDBY 0x8 -/* - * Regulator notifier events. - * - * UNDER_VOLTAGE Regulator output is under voltage. - * OVER_CURRENT Regulator output current is too high. - * REGULATION_OUT Regulator output is out of regulation. - * FAIL Regulator output has failed. - * OVER_TEMP Regulator over temp. - * FORCE_DISABLE Regulator forcibly shut down by software. - * VOLTAGE_CHANGE Regulator voltage changed. - * Data passed is old voltage cast to (void *). - * DISABLE Regulator was disabled. - * PRE_VOLTAGE_CHANGE Regulator is about to have voltage changed. - * Data passed is "struct pre_voltage_change_data" - * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason. - * Data passed is old voltage cast to (void *). - * PRE_DISABLE Regulator is about to be disabled - * ABORT_DISABLE Regulator disable failed for some reason - * - * NOTE: These events can be OR'ed together when passed into handler. - */ - -#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01 -#define REGULATOR_EVENT_OVER_CURRENT 0x02 -#define REGULATOR_EVENT_REGULATION_OUT 0x04 -#define REGULATOR_EVENT_FAIL 0x08 -#define REGULATOR_EVENT_OVER_TEMP 0x10 -#define REGULATOR_EVENT_FORCE_DISABLE 0x20 -#define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40 -#define REGULATOR_EVENT_DISABLE 0x80 -#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100 -#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200 -#define REGULATOR_EVENT_PRE_DISABLE 0x400 -#define REGULATOR_EVENT_ABORT_DISABLE 0x800 -#define REGULATOR_EVENT_ENABLE 0x1000 -/* - * Following notifications should be emitted only if detected condition - * is such that the HW is likely to still be working but consumers should - * take a recovery action to prevent problems esacalating into errors. - */ -#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000 -#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000 -#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000 -#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000 -#define REGULATOR_EVENT_WARN_MASK 0x1E000 - /* * Regulator errors that can be queried using regulator_get_error_flags * diff --git a/include/uapi/linux/regulator.h b/include/uapi/linux/regulator.h new file mode 100644 index 000000000000..d5f94a301841 --- /dev/null +++ b/include/uapi/linux/regulator.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __UAPI_LINUX_REGULATOR_CONSUMER_H_ +#define __UAPI_LINUX_REGULATOR_CONSUMER_H_ + +/* + * Regulator notifier events. + * + * UNDER_VOLTAGE Regulator output is under voltage. + * OVER_CURRENT Regulator output current is too high. + * REGULATION_OUT Regulator output is out of regulation. + * FAIL Regulator output has failed. + * OVER_TEMP Regulator over temp. + * FORCE_DISABLE Regulator forcibly shut down by software. + * VOLTAGE_CHANGE Regulator voltage changed. + * Data passed is old voltage cast to (void *). + * DISABLE Regulator was disabled. + * PRE_VOLTAGE_CHANGE Regulator is about to have voltage changed. + * Data passed is "struct pre_voltage_change_data" + * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason. + * Data passed is old voltage cast to (void *). + * PRE_DISABLE Regulator is about to be disabled + * ABORT_DISABLE Regulator disable failed for some reason + * + * NOTE: These events can be OR'ed together when passed into handler. + */ + +#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01 +#define REGULATOR_EVENT_OVER_CURRENT 0x02 +#define REGULATOR_EVENT_REGULATION_OUT 0x04 +#define REGULATOR_EVENT_FAIL 0x08 +#define REGULATOR_EVENT_OVER_TEMP 0x10 +#define REGULATOR_EVENT_FORCE_DISABLE 0x20 +#define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40 +#define REGULATOR_EVENT_DISABLE 0x80 +#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100 +#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200 +#define REGULATOR_EVENT_PRE_DISABLE 0x400 +#define REGULATOR_EVENT_ABORT_DISABLE 0x800 +#define REGULATOR_EVENT_ENABLE 0x1000 +/* + * Following notifications should be emitted only if detected condition + * is such that the HW is likely to still be working but consumers should + * take a recovery action to prevent problems esacalating into errors. + */ +#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000 +#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000 +#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000 +#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000 +#define REGULATOR_EVENT_WARN_MASK 0x1E000 + +#endif base-commit: 35d0d2350d774fecf596cfb2fb050559fe5e1850 -- 2.41.0
| |