lkml.org 
[lkml]   [2023]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V2 0/4] Enable IPQ5018 USB2 support
Date
This patch series adds the relevant phy and controller
DT configurations for enabling USB2 host mode support
on IPQ5018.

Tested with a USB Mass storage device.

[V2]:
Incorporated review comments regarding splitting the
series as per subsytem, device tree naming conventions
and ordereing of the nodes.

Nitheesh Sekar (4):
dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
arm64: dts: qcom: ipq5018: Add USB related nodes
arm64: dts: qcom: ipq5018: Enable USB

.../bindings/phy/qcom,ipq5332-usb-hsphy.yaml | 4 +-
.../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 12 ++++
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 54 +++++++++++++++++
drivers/phy/qualcomm/phy-qcom-m31.c | 60 +++++++++++++++++++
4 files changed, 129 insertions(+), 1 deletion(-)

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2023-08-30 21:10    [W:0.127 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site