lkml.org 
[lkml]   [2023]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/komeda: add NV12 format to support writeback layer type
Date
When testing the d71 writeback layer function,
the output format is set to NV12, and the following error message is displayed:

[drm:komeda_fb_is_layer_supported] Layer TYPE: 4 doesn't support fb FMT: NV12 little-endian (0x3231564e) with modifier: 0x0..

Check the d71 data manual, writeback layer output formats includes NV12 format.

Signed-off-by: baozhu.liu <lucas.liu@siengine.com>
---
drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
index 6c56f5662bc7..80973975bfdb 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
@@ -521,7 +521,7 @@ static struct komeda_format_caps d71_format_caps_table[] = {
{__HW_ID(5, 1), DRM_FORMAT_YUYV, RICH, Rot_ALL_H_V, LYT_NM, AFB_TH}, /* afbc */
{__HW_ID(5, 2), DRM_FORMAT_YUYV, RICH, Flip_H_V, 0, 0},
{__HW_ID(5, 3), DRM_FORMAT_UYVY, RICH, Flip_H_V, 0, 0},
- {__HW_ID(5, 6), DRM_FORMAT_NV12, RICH, Flip_H_V, 0, 0},
+ {__HW_ID(5, 6), DRM_FORMAT_NV12, RICH_WB, Flip_H_V, 0, 0},
{__HW_ID(5, 6), DRM_FORMAT_YUV420_8BIT, RICH, Rot_ALL_H_V, LYT_NM, AFB_TH}, /* afbc */
{__HW_ID(5, 7), DRM_FORMAT_YUV420, RICH, Flip_H_V, 0, 0},
/* YUV 10bit*/
--
2.17.1
\
 
 \ /
  Last update: 2023-08-29 11:53    [W:0.055 / U:1.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site