lkml.org 
[lkml]   [2023]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V2 5/6] soc: amlogic: Add support for T7 power domains controller
From
Hi Neil,
Thanks for your reply.

On 2023/8/24 16:30, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
>
> On 24/08/2023 07:59, Xianwei Zhao wrote:
>> From: "xianwei.zhao" <xianwei.zhao@amlogic.com>
>>
>> Add support for T7 power controller. T7 power control
>> registers are in secure domain, and should be accessed by SMC.
>>
>> Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com>
>> ---
>> V1 -> V2: Modify T7_NIC flag  "ALWAYS_ON"
>> ---
>>   drivers/genpd/amlogic/meson-secure-pwrc.c | 73 +++++++++++++++++++++++
>>   1 file changed, 73 insertions(+)
>>
>> diff --git a/drivers/genpd/amlogic/meson-secure-pwrc.c
>> b/drivers/genpd/amlogic/meson-secure-pwrc.c
>> index 3e7e3bd25d1f..2233f6cb7e71 100644
>> --- a/drivers/genpd/amlogic/meson-secure-pwrc.c
>> +++ b/drivers/genpd/amlogic/meson-secure-pwrc.c
>> @@ -13,6 +13,7 @@
>>   #include <dt-bindings/power/meson-a1-power.h>
>>   #include <dt-bindings/power/amlogic,c3-pwrc.h>
>>   #include <dt-bindings/power/meson-s4-power.h>
>> +#include <dt-bindings/power/amlogic,t7-pwrc.h>
>>   #include <linux/arm-smccc.h>
>>   #include <linux/firmware/meson/meson_sm.h>
>>   #include <linux/module.h>
>> @@ -164,6 +165,69 @@ static struct meson_secure_pwrc_domain_desc
>> s4_pwrc_domains[] = {
>>       SEC_PD(S4_AUDIO,        0),
>>   };
>>
>> +static struct meson_secure_pwrc_domain_desc t7_pwrc_domains[] = {
>> +     SEC_PD(T7_DSPA,         0),
>> +     SEC_PD(T7_DSPB,         0),
>> +     TOP_PD(T7_DOS_HCODEC,   0, PWRC_T7_NIC3_ID),
>> +     TOP_PD(T7_DOS_HEVC,     0, PWRC_T7_NIC3_ID),
>> +     TOP_PD(T7_DOS_VDEC,     0, PWRC_T7_NIC3_ID),
>> +     TOP_PD(T7_DOS_WAVE,     0, PWRC_T7_NIC3_ID),
>> +     SEC_PD(T7_VPU_HDMI,     0),
>> +     SEC_PD(T7_USB_COMB,     0),
>> +     SEC_PD(T7_PCIE,         0),
>> +     TOP_PD(T7_GE2D,         0, PWRC_T7_NIC3_ID),
>> +     /* SRAMA is used as ATF runtime memory, and should be always on */
>> +     SEC_PD(T7_SRAMA,        GENPD_FLAG_ALWAYS_ON),
>> +     /* SRAMB is used as ATF runtime memory, and should be always on */
>> +     SEC_PD(T7_SRAMB,        GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_HDMIRX,       0),
>> +     SEC_PD(T7_VI_CLK1,      0),
>> +     SEC_PD(T7_VI_CLK2,      0),
>> +     /* ETH is for ethernet online wakeup, and should be always on */
>> +     SEC_PD(T7_ETH,          GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_ISP,          0),
>> +     SEC_PD(T7_MIPI_ISP,     0),
>> +     TOP_PD(T7_GDC,          0, PWRC_T7_NIC3_ID),
>> +     TOP_PD(T7_DEWARP,       0, PWRC_T7_NIC3_ID),
>> +     SEC_PD(T7_SDIO_A,       0),
>> +     SEC_PD(T7_SDIO_B,       0),
>> +     SEC_PD(T7_EMMC,         0),
>> +     TOP_PD(T7_MALI_SC0,     0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_MALI_SC1,     0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_MALI_SC2,     0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_MALI_SC3,     0, PWRC_T7_NNA_TOP_ID),
>> +     SEC_PD(T7_MALI_TOP,     0),
>> +     TOP_PD(T7_NNA_CORE0,    0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_NNA_CORE1,    0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_NNA_CORE2,    0, PWRC_T7_NNA_TOP_ID),
>> +     TOP_PD(T7_NNA_CORE3,    0, PWRC_T7_NNA_TOP_ID),
>> +     SEC_PD(T7_NNA_TOP,      0),
>> +     SEC_PD(T7_DDR0,         GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_DDR1,         GENPD_FLAG_ALWAYS_ON),
>> +     /* DMC0 is for DDR PHY ana/dig and DMC, and should be always on */
>> +     SEC_PD(T7_DMC0,         GENPD_FLAG_ALWAYS_ON),
>> +     /* DMC1 is for DDR PHY ana/dig and DMC, and should be always on */
>> +     SEC_PD(T7_DMC1,         GENPD_FLAG_ALWAYS_ON),
>> +     /* NOC is related to clk bus, and should be always on */
>> +     SEC_PD(T7_NOC,          GENPD_FLAG_ALWAYS_ON),
>> +     /* NIC is for the Arm NIC-400 interconnect, and should be always
>> on */
>> +     SEC_PD(T7_NIC2,         GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_NIC3,         0),
>> +     /* CPU accesses the interleave data to the ddr need cci, and
>> should be always on */
>> +     SEC_PD(T7_CCI,          GENPD_FLAG_ALWAYS_ON),
>> +     SEC_PD(T7_MIPI_DSI0,    0),
>> +     SEC_PD(T7_SPICC0,       0),
>> +     SEC_PD(T7_SPICC1,       0),
>> +     SEC_PD(T7_SPICC2,       0),
>> +     SEC_PD(T7_SPICC3,       0),
>> +     SEC_PD(T7_SPICC4,       0),
>> +     SEC_PD(T7_SPICC5,       0),
>> +     SEC_PD(T7_EDP0,         0),
>> +     SEC_PD(T7_EDP1,         0),
>> +     SEC_PD(T7_MIPI_DSI1,    0),
>> +     SEC_PD(T7_AUDIO,        0),
>> +};
>> +
>>   static int meson_secure_pwrc_probe(struct platform_device *pdev)
>>   {
>>       int i;
>> @@ -257,6 +321,11 @@ static struct meson_secure_pwrc_domain_data
>> meson_secure_s4_pwrc_data = {
>>       .count = ARRAY_SIZE(s4_pwrc_domains),
>>   };
>>
>> +static struct meson_secure_pwrc_domain_data
>> amlogic_secure_t7_pwrc_data = {
>> +     .domains = t7_pwrc_domains,
>> +     .count = ARRAY_SIZE(t7_pwrc_domains),
>> +};
>> +
>>   static const struct of_device_id meson_secure_pwrc_match_table[] = {
>>       {
>>               .compatible = "amlogic,meson-a1-pwrc",
>> @@ -270,6 +339,10 @@ static const struct of_device_id
>> meson_secure_pwrc_match_table[] = {
>>               .compatible = "amlogic,meson-s4-pwrc",
>>               .data = &meson_secure_s4_pwrc_data,
>>       },
>> +     {
>> +             .compatible = "amlogic,t7-pwrc",
>> +             .data = &amlogic_secure_t7_pwrc_data,
>> +     },
>>       { /* sentinel */ }
>>   };
>>   MODULE_DEVICE_TABLE(of, meson_secure_pwrc_match_table);
>
> With updated subject:
Will do.
>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

\
 
 \ /
  Last update: 2023-08-24 10:51    [W:0.095 / U:1.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site