lkml.org 
[lkml]   [2023]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH] i3c: master: Fix SETDASA process
From
When a I3C DT node has a static_addr and an init_dyn_addr,the
init_dyn_addr is reserved in i3c_master_bus_init() and then
the static_addr is reserved in i3c_master_early_i3c_dev_add().
But if the dynamic address is same as static then above
procedure would fail.
Add a check to pass i3c_bus_get_addr_slot_status() when static
and dynamic address are equal.

Signed-off-by: Aniket <aniketmaurya@google.com>
---
drivers/i3c/master.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 08aeb69a7800..87283e4a4607 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1308,7 +1308,11 @@ static int i3c_master_get_i3c_addrs(struct i3c_dev_desc *dev)
if (dev->info.static_addr) {
status = i3c_bus_get_addr_slot_status(&master->bus,
dev->info.static_addr);
- if (status != I3C_ADDR_SLOT_FREE)
+ /* Since static address and assigned dynamic address can be
+ * equal, allow this case to pass.
+ */
+ if (status != I3C_ADDR_SLOT_FREE &&
+ dev->info.static_addr != dev->boardinfo->init_dyn_addr)
return -EBUSY;

i3c_bus_set_addr_slot_status(&master->bus,
--
2.42.0.rc1.204.g551eb34607-goog
\
 
 \ /
  Last update: 2023-08-22 07:20    [W:0.072 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site