lkml.org 
[lkml]   [2023]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
Date
A schema under 'additionalProperties' works better for matching any
property/node other than the ones explicitly listed. Convert the schema
to use that rather than the wildcard and if/then schema.

Drop 'phandle' properties which never need to be explicitly listed while
we're here.

Signed-off-by: Rob Herring <robh@kernel.org>
---
.../pinctrl/renesas,rza2-pinctrl.yaml | 61 +++++++++----------
1 file changed, 28 insertions(+), 33 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
index 37173a64fed2..8271e7b2c162 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -37,40 +37,37 @@ properties:
gpio-ranges:
maxItems: 1

-patternProperties:
- "^.*$":
- if:
- type: object
- then:
- allOf:
- - $ref: pincfg-node.yaml#
- - $ref: pinmux-node.yaml#
+additionalProperties:
+ type: object
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ The child nodes of the pin controller designate pins to be used for
+ specific peripheral functions or as GPIO.
+
+ A pin multiplexing sub-node describes how to configure a set of
+ (or a single) pin in some desired alternate function mode.
+ The values for the pinmux properties are a combination of port name,
+ pin number and the desired function index. Use the RZA2_PINMUX macro
+ located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
+ define these.
+ For assigning GPIO pins, use the macro RZA2_PIN also in
+ to express the desired port pin.
+
+ properties:
+ pinmux:
description:
- The child nodes of the pin controller designate pins to be used for
- specific peripheral functions or as GPIO.
+ Values are constructed from GPIO port number, pin number, and
+ alternate function configuration number using the RZA2_PINMUX()
+ helper macro in r7s9210-pinctrl.h.

- A pin multiplexing sub-node describes how to configure a set of
- (or a single) pin in some desired alternate function mode.
- The values for the pinmux properties are a combination of port name,
- pin number and the desired function index. Use the RZA2_PINMUX macro
- located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
- define these.
- For assigning GPIO pins, use the macro RZA2_PIN also in
- to express the desired port pin.
+ required:
+ - pinmux

- properties:
- phandle: true
-
- pinmux:
- description:
- Values are constructed from GPIO port number, pin number, and
- alternate function configuration number using the RZA2_PINMUX()
- helper macro in r7s9210-pinctrl.h.
-
- required:
- - pinmux
-
- additionalProperties: false
+ additionalProperties: false

allOf:
- $ref: pinctrl.yaml#
@@ -82,8 +79,6 @@ required:
- '#gpio-cells'
- gpio-ranges

-additionalProperties: false
-
examples:
- |
#include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
--
2.40.1
\
 
 \ /
  Last update: 2023-08-19 03:10    [W:0.094 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site