lkml.org 
[lkml]   [2023]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH net-next] net: pcs: lynxi: implement pcs_disable op
When switching from 10GBase-R/5GBase-R/USXGMII to one of the interface
modes provided by mtk-pcs-lynxi we need to make sure to always perform
a full configuration of the PHYA.

Implement pcs_disable op which resets the stored interface mode to
PHY_INTERFACE_MODE_NA to trigger a full reconfiguration once the LynxI
PCS driver had previously been deselected in favor of another PCS
driver such as the to-be-added driver for the USXGMII PCS found in
MT7988.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/net/pcs/pcs-mtk-lynxi.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/net/pcs/pcs-mtk-lynxi.c b/drivers/net/pcs/pcs-mtk-lynxi.c
index b0f3ede945d96..8501dd365279b 100644
--- a/drivers/net/pcs/pcs-mtk-lynxi.c
+++ b/drivers/net/pcs/pcs-mtk-lynxi.c
@@ -233,11 +233,19 @@ static void mtk_pcs_lynxi_link_up(struct phylink_pcs *pcs,
}
}

+static void mtk_pcs_lynxi_disable(struct phylink_pcs *pcs)
+{
+ struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
+
+ mpcs->interface = PHY_INTERFACE_MODE_NA;
+}
+
static const struct phylink_pcs_ops mtk_pcs_lynxi_ops = {
.pcs_get_state = mtk_pcs_lynxi_get_state,
.pcs_config = mtk_pcs_lynxi_config,
.pcs_an_restart = mtk_pcs_lynxi_restart_an,
.pcs_link_up = mtk_pcs_lynxi_link_up,
+ .pcs_disable = mtk_pcs_lynxi_disable,
};

struct phylink_pcs *mtk_pcs_lynxi_create(struct device *dev,
--
2.41.0
\
 
 \ /
  Last update: 2023-08-18 05:08    [W:0.036 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site