lkml.org 
[lkml]   [2023]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9 07/13] media: cadence: csi2rx: Soft reset the streams before starting capture
From
On 11/08/2023 13:47, Jai Luthra wrote:
> From: Pratyush Yadav <p.yadav@ti.com>
>
> This resets the stream state machines and FIFOs, giving them a clean
> slate. On J721E if the streams are not reset before starting the
> capture, the captured frame gets wrapped around vertically on every run
> after the first.
>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Maxime Ripard <mripard@kernel.org>
> Signed-off-by: Jai Luthra <j-luthra@ti.com>
> ---
> Changes from v8:
> - Simplify reset sequence, minimizing delays
>
> drivers/media/platform/cadence/cdns-csi2rx.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
> index 933edec89520..b57e0c3b1944 100644
> --- a/drivers/media/platform/cadence/cdns-csi2rx.c
> +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
> @@ -40,6 +40,7 @@
> #define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100)
>
> #define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000)
> +#define CSI2RX_STREAM_CTRL_SOFT_RST BIT(4)
> #define CSI2RX_STREAM_CTRL_START BIT(0)
>
> #define CSI2RX_STREAM_DATA_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x008)
> @@ -134,12 +135,23 @@ struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
>
> static void csi2rx_reset(struct csi2rx_priv *csi2rx)
> {
> + unsigned int i;
> +
> + /* Reset module */
> writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT,
> csi2rx->base + CSI2RX_SOFT_RESET_REG);
> + /* Reset individual streams. */
> + for (i = 0; i < csi2rx->max_streams; i++) {
> + writel(CSI2RX_STREAM_CTRL_SOFT_RST,
> + csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
> + }
>
> - udelay(10);
> + usleep_range(10, 20);
>
> + /* Clear resets */
> writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG);
> + for (i = 0; i < csi2rx->max_streams; i++)
> + writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
> }
>
> static int csi2rx_configure_ext_dphy(struct csi2rx_priv *csi2rx)
>

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

Tomi

\
 
 \ /
  Last update: 2023-08-15 14:11    [W:0.730 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site