lkml.org 
[lkml]   [2023]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 10/13] media: cadence: csi2rx: Populate subdev devnode
Date
From: Pratyush Yadav <p.yadav@ti.com>

The devnode can be used by media-ctl and other userspace tools to
perform configurations on the subdev. Without it, media-ctl returns
ENOENT when setting format on the sensor subdev.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
---
drivers/media/platform/cadence/cdns-csi2rx.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 46effbbe580d..0947b112a573 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -673,6 +673,7 @@ static int csi2rx_probe(struct platform_device *pdev)
csi2rx->pads[CSI2RX_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
for (i = CSI2RX_PAD_SOURCE_STREAM0; i < CSI2RX_PAD_MAX; i++)
csi2rx->pads[i].flags = MEDIA_PAD_FL_SOURCE;
+ csi2rx->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;

ret = media_entity_pads_init(&csi2rx->subdev.entity, CSI2RX_PAD_MAX,
csi2rx->pads);
--
2.41.0

\
 
 \ /
  Last update: 2023-08-11 12:50    [W:0.432 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site