lkml.org 
[lkml]   [2023]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drivers:i2c:add controller reset when the timeout occurred
Date
1.Call i2c controller reset when the i2c transfer timeout occurred.
The rest of interrupts and device should be reset avoid unperdicted
controller behavior occurred.

Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
---
drivers/i2c/busses/i2c-aspeed.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 2e5acfeb76c8..1900954deb55 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -699,12 +699,16 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
if (time_left == 0) {
/*
* If timed out and bus is still busy in a multi master
- * environment, attempt recovery at here.
+ * environment, attempt recovery at here. Even the bus is
+ * idle, we still need reset i2c controller avoid rest of
+ * interrupts.
*/
if (bus->multi_master &&
(readl(bus->base + ASPEED_I2C_CMD_REG) &
ASPEED_I2CD_BUS_BUSY_STS))
aspeed_i2c_recover_bus(bus);
+ else
+ aspeed_i2c_reset(bus);

/*
* If timed out and the state is still pending, drop the pending
--
2.25.1
\
 
 \ /
  Last update: 2023-08-14 13:17    [W:0.111 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site