lkml.org 
[lkml]   [2023]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectFailing network hardware
Hello all,

About a year or so ago, I upgraded one of my Debian servers to
Bullseye, and it killed the 10G NIC on the server due to issues with the
device driver in the Debian repository (it was missing). I jumped
through all sorts of loops and hoops to try to get it working, but I
finally had to give up and resort to using the 1G interface. Recently,
I tried a new install on a different server to the new Debian Bookworm,
and it worked for that server, so apparently the issue has been fixed in
Bookworm. I reported a bug against the Buster distribution, but it was
never fixed.

With that in mind, I went ahead and upgraded the original server to
Bookworm, but the NIC remains dead. Unfortunately, I cannot find my
notes on what I did originally to try to get the 10G interface working
and to shut it down in favor of a built-in port. I do recall I tried
compiling what was supposed to be the correct firmware driver and also
changing the udev rules, but I do not recall the exact details. I have
tried several things, including re-installing the firmware, but nothing
seems to work. The Ethernet interface does not appear on the system in
order to be able to specify it in /etc/network/interfaces. What can I
do in order to try to get the 10G card working?

The card is an Asus MCB-10G_PEB-10G NIC and uses the bnx2x.ko driver.
The system uses an Asus AMD-64 motherboard. The bnx2x.ko driver is
installed, and lspci shows the card in the system, but ifconfig does not
see the interface.


root@RAID-Server:~# lspci | grep Broadcom
06:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme II
BCM57811 10-Gigabit Ethernet (rev 10)


\
 
 \ /
  Last update: 2023-08-13 20:54    [W:0.047 / U:2.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site