lkml.org 
[lkml]   [2023]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] usb: typec: qcom-pmic-typec: enable DP support
Date
To enable DisplayPort on the platforms supported by qcom-pmic-typec
driver, we need to register a corresponding drm_bridge for this device
and also be able to send the OOB hotplug event to the corresponding DRM
connector. All this is implemented by [1], but there is no direct
dependency on that patchset.

[1] https://patchwork.freedesktop.org/series/120393/

Dmitry Baryshkov (2):
usb: typec: altmodes/displayport: add support for embedded DP cases
usb: typec: qcom-pmic-typec: register drm_bridge

drivers/usb/typec/altmodes/displayport.c | 5 +++-
drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 25 +++++++++++++++++++
2 files changed, 29 insertions(+), 1 deletion(-)

--
2.39.2

\
 
 \ /
  Last update: 2023-07-09 05:48    [W:0.058 / U:1.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site