lkml.org 
[lkml]   [2023]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] usb: gadget: call usb_gadget_check_config() to verify UDC capability
Date
The legacy gadget driver omitted calling usb_gadget_check_config()
to ensure that the USB device controller (UDC) has adequate resources,
including sufficient endpoint numbers and types, to support the given
configuration.

Previously, usb_add_config() was solely invoked by the legacy gadget
driver. Adds the necessary usb_gadget_check_config() after the bind()
operation to fix the issue.

Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number")
Reported-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- not change for this patch, just add new patch to fix multi-config case

drivers/usb/gadget/composite.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 403563c06477..cb0a4e2cdbb7 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1029,6 +1029,10 @@ int usb_add_config(struct usb_composite_dev *cdev,
goto done;

status = bind(config);
+
+ if (status == 0)
+ status = usb_gadget_check_config(cdev->gadget);
+
if (status < 0) {
while (!list_empty(&config->functions)) {
struct usb_function *f;
--
2.34.1
\
 
 \ /
  Last update: 2023-07-08 01:02    [W:0.085 / U:2.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site