lkml.org 
[lkml]   [2023]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V2 net 0/4] net: fec: fix some issues of ndo_xdp_xmit()
Date
From: Wei Fang <wei.fang@nxp.com>

We encountered some issues when testing the ndo_xdp_xmit() interface
of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
easy to reproduce, and the specific reproduction steps are as follows.

step1: The ethernet port of a board (board A) is connected to the EQOS
port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
to another ethernet port, such as a switch port.

step2: Board A uses the pktgen_sample03_burst_single_flow.sh to generate
and send packets to i.MX8MP/i.MX93. The command is shown below.
./pktgen_sample03_burst_single_flow.sh -i eth0 -d 192.168.6.8 -m \
56:bf:0d:68:b0:9e -s 1500

step3: i.MX8MP/i.MX93 use the xdp_redirect bfp program to redirect the
XDP frames from EQOS port to FEC port. The command is shown below.
./xdp_redirect eth1 eth0

After a few moments, the warning or error logs will be printed in the
console, for more details, please refer to the commit message of each
patch.

Wei Fang (4):
net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDP
net: fec: recycle pages for transmitted XDP frames
net: fec: increase the size of tx ring and update tx_wake_threshold
net: fec: use netdev_err_once() instead of netdev_err()

drivers/net/ethernet/freescale/fec.h | 17 ++-
drivers/net/ethernet/freescale/fec_main.c | 166 +++++++++++++++-------
2 files changed, 127 insertions(+), 56 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2023-07-06 10:17    [W:0.088 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site