Messages in this thread Patch in this message | | | From | Suman Ghosh <> | Subject | [PATCH V3] octeontx2-pf: Add additional check for MCAM rules | Date | Mon, 3 Jul 2023 22:30:54 +0530 |
| |
Due to hardware limitation, MCAM drop rule with ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting such rules.
Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters") Signed-off-by: Suman Ghosh <sumang@marvell.com> --- Changes since v2: - Added "fixes" tag
.../net/ethernet/marvell/octeontx2/nic/otx2_flows.c | 7 +++++++ .../net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 13 +++++++++++++ 2 files changed, 20 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c index 10e11262d48a..49ba27875111 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c @@ -871,6 +871,13 @@ static int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp, if (be16_to_cpu(fsp->m_ext.vlan_etype) != 0xFFFF) return -EINVAL; + /* Drop rule with vlan_etype == 802.1Q + * and vlan_id == 0 is not supported + */ + if (vlan_etype == ETH_P_8021Q && !fsp->m_ext.vlan_tci && + fsp->ring_cookie == RX_CLS_FLOW_DISC) + return -EINVAL; + vlan_etype = be16_to_cpu(fsp->h_ext.vlan_etype); /* Only ETH_P_8021Q and ETH_P_802AD types supported */ if (vlan_etype != ETH_P_8021Q && diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c index 044cc211424e..6c0fdc2bad73 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c @@ -604,6 +604,19 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node, return -EOPNOTSUPP; } + if (!match.mask->vlan_id) { + struct flow_action_entry *act; + int i; + + flow_action_for_each(i, act, &rule->action) { + if (act->id == FLOW_ACTION_DROP) { + netdev_err(nic->netdev, "vlan tpid 0x%x with vlan_id %d is not supported for DROP rule.\n", + ntohs(match.key->vlan_tpid), match.key->vlan_id); + return -EOPNOTSUPP; + } + } + } + if (match.mask->vlan_id || match.mask->vlan_dei || match.mask->vlan_priority) { -- 2.25.1
| |