Messages in this thread Patch in this message | | | From | Varshini Rajendran <> | Subject | [PATCH v3 27/50] dt-bindings: usb: atmel: add sam9x7 | Date | Fri, 28 Jul 2023 15:57:53 +0530 |
| |
Add sam9x7 bindings.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> --- Documentation/devicetree/bindings/usb/atmel-usb.txt | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 12183ef47ee4..82bd0dbc2a48 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -3,8 +3,9 @@ Atmel SOC USB controllers OHCI Required properties: - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers - used in host mode. + - compatible: Should be "atmel,at91rm9200-ohci" or + "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci" + for USB controllers used in host mode. - reg: Address and length of the register set for the device - interrupts: Should contain ohci interrupt - clocks: Should reference the peripheral, host and system clocks @@ -30,8 +31,9 @@ usb0: ohci@500000 { EHCI Required properties: - - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers - used in host mode. + - compatible: Should be "atmel,at91sam9g45-ehci" or + "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci" + for USB controllers used in host mode. - reg: Address and length of the register set for the device - interrupts: Should contain ehci interrupt - clocks: Should reference the peripheral and the UTMI clocks @@ -87,6 +89,7 @@ Required properties: "atmel,at91sam9g45-udc" "atmel,sama5d3-udc" "microchip,sam9x60-udc" + "microchip,sam9x7-udc", "microchip,sam9x60-udc" "microchip,lan9662-udc" For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc" is required. -- 2.25.1
| |