lkml.org 
[lkml]   [2023]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] vdpa/mlx5: Correct default number of queues when MQ is on
Date
The standard specifies that the initial number of queues is the
default, which is 1 (1 tx, 1 rx).

Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 9138ef2fb2c8..6b6eb69a8a90 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -2517,7 +2517,15 @@ static int mlx5_vdpa_set_driver_features(struct vdpa_device *vdev, u64 features)
else
ndev->rqt_size = 1;

- ndev->cur_num_vqs = 2 * ndev->rqt_size;
+ /* Device must start with 1 queue pair, as per VIRTIO v1.2 spec, section
+ * 5.1.6.5.5 "Device operation in multiqueue mode":
+ *
+ * Multiqueue is disabled by default.
+ * The driver enables multiqueue by sending a command using class
+ * VIRTIO_NET_CTRL_MQ. The command selects the mode of multiqueue
+ * operation, as follows: ...
+ */
+ ndev->cur_num_vqs = 2;

update_cvq_info(mvdev);
return err;
--
2.41.0
\
 
 \ /
  Last update: 2023-07-27 19:25    [W:0.037 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site