lkml.org 
[lkml]   [2023]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH -next] drm/bridge: fix -Wunused-const-variable= warning
Date
When building with W=1, the following warning occurs.

drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ defined but not used [-Wunused-const-variable=]
static const u8 anx781x_i2c_addresses[] = {
^~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:40:17: warning: ‘anx7808_i2c_addresses’ defined but not used [-Wunused-const-variable=]
static const u8 anx7808_i2c_addresses[] = {

The definition of above two data variables is included by the
macro CONFIG_OF, so we also include the data variable
definitions in the macro CONFIG_OF. And in addition the data
variable anx78xx_match_table is included in the macro CONFIG_OF,
so we add CONFIG_OF to the place where it is used.

Fixes: 5d97408e0d70 ("drm/bridge: move ANA78xx driver to analogix subdirectory")

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
---
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
index 06a3e3243e19..799b33cebdd5 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
@@ -37,6 +37,7 @@

#define XTAL_CLK 270 /* 27M */

+#if IS_ENABLED(CONFIG_OF)
static const u8 anx7808_i2c_addresses[] = {
[I2C_IDX_TX_P0] = 0x78,
[I2C_IDX_TX_P1] = 0x7a,
@@ -52,6 +53,7 @@ static const u8 anx781x_i2c_addresses[] = {
[I2C_IDX_RX_P0] = 0x7e,
[I2C_IDX_RX_P1] = 0x80,
};
+#endif

struct anx78xx_platform_data {
struct regulator *dvdd10;
@@ -1387,7 +1389,9 @@ MODULE_DEVICE_TABLE(of, anx78xx_match_table);
static struct i2c_driver anx78xx_driver = {
.driver = {
.name = "anx7814",
+#if IS_ENABLED(CONFIG_OF)
.of_match_table = of_match_ptr(anx78xx_match_table),
+#endif
},
.probe = anx78xx_i2c_probe,
.remove = anx78xx_i2c_remove,
--
2.17.1
\
 
 \ /
  Last update: 2023-07-26 12:08    [W:0.025 / U:2.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site