Messages in this thread Patch in this message | | | From | Hugo Villeneuve <> | Date | Sat, 22 Jul 2023 14:09:25 -0400 | Subject | [PATCH v2] auxdisplay: hd44780: move cursor home after clear display command |
| |
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
The DISPLAY_CLEAR command on the NewHaven NHD-0220DZW-AG5 display does NOT change the DDRAM address to 00h (home position) like the standard Hitachi HD44780 controller. As a consequence, the starting position of the initial string LCD_INIT_TEXT is not guaranteed to be at 0,0 depending on where the cursor was before the DISPLAY_CLEAR command.
Extract of DISPLAY_CLEAR command from datasheets of:
Hitachi HD44780: ... It then sets DDRAM address 0 into the address counter...
NewHaven NHD-0220DZW-AG5 datasheet: ... This instruction does not change the DDRAM Address
Move the cursor home after sending DISPLAY_CLEAR command to support non-standard LCDs.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> --- drivers/auxdisplay/hd44780_common.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/auxdisplay/hd44780_common.c b/drivers/auxdisplay/hd44780_common.c index 3934c2eebf33..7cbf375b0fa5 100644 --- a/drivers/auxdisplay/hd44780_common.c +++ b/drivers/auxdisplay/hd44780_common.c @@ -82,7 +82,15 @@ int hd44780_common_clear_display(struct charlcd *lcd) hdc->write_cmd(hdc, LCD_CMD_DISPLAY_CLEAR); /* datasheet says to wait 1,64 milliseconds */ long_sleep(2); - return 0; + + /* + * The Hitachi HD44780 controller (and compatible ones) reset the DDRAM + * address when executing the DISPLAY_CLEAR command, thus the + * following call is not required. However, other controllers do not + * (e.g. NewHaven NHD-0220DZW-AG5), thus move the cursor to home + * unconditionally to support both. + */ + return hd44780_common_home(lcd); } EXPORT_SYMBOL_GPL(hd44780_common_clear_display); base-commit: d192f5382581d972c4ae1b4d72e0b59b34cadeb9 -- 2.30.2
| |