Messages in this thread | | | From | Raju Lakkaraju <> | Subject | [PATCH net-next 0/7] Add support to PHYLINK and SFP for PCI11x1x chips | Date | Fri, 21 Jul 2023 11:30:12 +0530 |
| |
This patch series adds support to PHYLINK and SFP pluggable module. Add software-nodes to hold the network interface phylink, sfp, i2c and GPIO configuration and integrates the PCI1x1x chip I2C driver and GPIO driver to access the SFP module EEPROM data.
Tested on chip PCI11010 Rev-B with Bridgeport Evaluation board Rev-1 with following SFP modules:
1. FS's 2.5G SFP (SFP-2.5G-T) with 2.5 Gbps speed (interface 2500Base-X)
2. FS's DAC10G SFP (SFPP-PC01) with 2.5 Gbps speed (interface 2500Base-X)
3. FS's 1G SFP (SFP-GB-GE-TL) with 1G/100M/10M bps speed (interface SGMII)
4. Axcen's 1G SFP (AXGT-R1T4-05I1) with 1G/100M/10M bps speed (interface SGMII)
5. Excom's 1G SFP (SFP-T) with 1G/100M/10M bps speed (interface SGMII)
Raju Lakkaraju (7): net: lan743x: Create separate PCS power reset function net: lan743x: Create separate Link Speed Duplex state function net: lan743x: Add SFP support check flag net: lan743x: Add support to software-nodes for SFP and PHYLINK net: lan743x: Add support to the Phylink framework net: lan743x: Add support to ethtool phylink get and set settings net: lan743x: Register the platform device for sfp pluggable module
drivers/net/ethernet/microchip/Kconfig | 4 +- .../net/ethernet/microchip/lan743x_ethtool.c | 34 +- drivers/net/ethernet/microchip/lan743x_main.c | 707 ++++++++++++++++-- drivers/net/ethernet/microchip/lan743x_main.h | 42 ++ 4 files changed, 718 insertions(+), 69 deletions(-)
-- 2.25.1
| |