lkml.org 
[lkml]   [2023]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH] arm64: dts: imx8mp: use correct clock for eqos timestamping counter
The i.MX8MP Reference Manual rev 1 06/2021, section 11.7.2.5 "Timestamp
Support" indicates the PTP timestamp clock expects a typical frequency
of 125MHz.

As this also improves the precision of the measured timestamps: assign
appropriate 125MHz Clock parent. As no one except the timestamping
counter uses this clock, there are no side-effects of this change in
other peripherals.

Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 6f2f50e1639c..7f80dff914c2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1334,7 +1334,7 @@ eqos: ethernet@30bf0000 {
<&clk IMX8MP_CLK_ENET_QOS_TIMER>,
<&clk IMX8MP_CLK_ENET_QOS>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
- <&clk IMX8MP_SYS_PLL2_100M>,
+ <&clk IMX8MP_SYS_PLL2_125M>,
<&clk IMX8MP_SYS_PLL2_125M>;
assigned-clock-rates = <0>, <100000000>, <125000000>;
nvmem-cells = <&eth_mac2>;
---
base-commit: ba345b77fae7054d0cbd033283c47033e45db6d8
change-id: 20230719-imx8mp_enet_qos_use_125mhz_clock-1c4611c979ba
Best regards,
--
Johannes Zink <j.zink@pengutronix.de>

\
 
 \ /
  Last update: 2023-07-19 16:00    [W:1.741 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site