Messages in this thread | | | Date | Thu, 29 Jun 2023 13:56:25 +0300 | Subject | Re: [PATCH v2 13/15] arm64: dts: qcom: sm6125: Add dispcc node | From | Dmitry Baryshkov <> |
| |
On 27/06/2023 23:14, Marijn Suijten wrote: > Enable and configure the dispcc node on SM6125 for consumption by MDSS > later on. > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > arch/arm64/boot/dts/qcom/sm6125.dtsi | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi > index edb03508dba3..a5cc0d43d2d9 100644 > --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi > @@ -3,6 +3,7 @@ > * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org> > */ > > +#include <dt-bindings/clock/qcom,dispcc-sm6125.h> > #include <dt-bindings/clock/qcom,gcc-sm6125.h> > #include <dt-bindings/clock/qcom,rpmcc.h> > #include <dt-bindings/dma/qcom-gpi.h> > @@ -1203,6 +1204,30 @@ sram@4690000 { > reg = <0x04690000 0x10000>; > }; > > + dispcc: clock-controller@5f00000 { > + compatible = "qcom,sm6125-dispcc"; > + reg = <0x05f00000 0x20000>; > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, > + <0>, > + <0>, > + <0>, > + <0>, > + <0>, > + <&gcc GCC_DISP_AHB_CLK>, > + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; > + clock-names = "bi_tcxo", > + "dsi0_phy_pll_out_byteclk", > + "dsi0_phy_pll_out_dsiclk", > + "dsi1_phy_pll_out_dsiclk", > + "dp_phy_pll_link_clk", > + "dp_phy_pll_vco_div_clk", > + "cfg_ahb_clk", > + "gcc_disp_gpll0_div_clk_src"; > + power-domains = <&rpmpd SM6125_VDDCX>;
Would it be logical to specify the required-opps too?
> + #clock-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > apps_smmu: iommu@c600000 { > compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500"; > reg = <0x0c600000 0x80000>; >
-- With best wishes Dmitry
| |