lkml.org 
[lkml]   [2023]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] serial: 8250_dw: Preserve original value of DLF register
Date
Preserve the original value of the Divisor Latch Fraction (DLF) register.
When the DLF register is modified without preservation, it can disrupt
the baudrate settings established by firmware or bootloader, leading to
data corruption and the generation of unreadable or distorted characters.

Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support")
Signed-off-by: Ruihong Luo <colorsu1922@gmail.com>
---
v3:
- modify the commit message
- use personal email to sign
drivers/tty/serial/8250/8250_dwlib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index 75f32f054ebb..d30957722da8 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)
struct dw8250_port_data *pd = p->private_data;
struct dw8250_data *data = to_dw8250_data(pd);
struct uart_8250_port *up = up_to_u8250p(p);
- u32 reg;
+ u32 reg, orig;

pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
if (pd->hw_rs485_support) {
@@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p)
dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);

+ /* Preserve value written by firmware or bootloader */
+ orig = dw8250_readl_ext(p, DW_UART_DLF);
dw8250_writel_ext(p, DW_UART_DLF, ~0U);
reg = dw8250_readl_ext(p, DW_UART_DLF);
- dw8250_writel_ext(p, DW_UART_DLF, 0);
+ dw8250_writel_ext(p, DW_UART_DLF, orig);

if (reg) {
pd->dlf_size = fls(reg);
--
2.39.2
\
 
 \ /
  Last update: 2023-06-30 02:46    [W:0.038 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site