lkml.org 
[lkml]   [2023]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH RFC v4 3/7] drm/atomic: Move framebuffer checks to helper
From
On 30/06/2023 03:25, Jessica Zhang wrote:
> Currently framebuffer checks happen directly in
> drm_atomic_plane_check(). Move these checks into their own helper
> method.
>
> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 130 ++++++++++++++++++++++++-------------------
> 1 file changed, 74 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index b4c6ffc438da..404b984d2d9f 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -580,6 +580,76 @@ plane_switching_crtc(const struct drm_plane_state *old_plane_state,
> return true;
> }
>
> +static int drm_atomic_check_fb(const struct drm_plane_state *state)
> +{
> + struct drm_plane *plane = state->plane;
> + const struct drm_framebuffer *fb = state->fb;
> + struct drm_mode_rect *clips;
> +
> + uint32_t num_clips;
> + unsigned int fb_width, fb_height;
> + int ret;
> +
> + /* Check whether this plane supports the fb pixel format. */
> + ret = drm_plane_check_pixel_format(plane, fb->format->format,
> + fb->modifier);
> +
> + if (ret) {
> + drm_dbg_atomic(plane->dev,
> + "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n",
> + plane->base.id, plane->name,
> + &fb->format->format, fb->modifier);
> + return ret;
> + }
> +
> + fb_width = fb->width << 16;
> + fb_height = fb->height << 16;
> +
> + /* Make sure source coordinates are inside the fb. */
> + if (state->src_w > fb_width ||
> + state->src_x > fb_width - state->src_w ||
> + state->src_h > fb_height ||
> + state->src_y > fb_height - state->src_h) {
> + drm_dbg_atomic(plane->dev,
> + "[PLANE:%d:%s] invalid source coordinates "
> + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
> + plane->base.id, plane->name,
> + state->src_w >> 16,
> + ((state->src_w & 0xffff) * 15625) >> 10,
> + state->src_h >> 16,
> + ((state->src_h & 0xffff) * 15625) >> 10,
> + state->src_x >> 16,
> + ((state->src_x & 0xffff) * 15625) >> 10,
> + state->src_y >> 16,
> + ((state->src_y & 0xffff) * 15625) >> 10,
> + fb->width, fb->height);
> + return -ENOSPC;
> + }
> +
> + clips = __drm_plane_get_damage_clips(state);
> + num_clips = drm_plane_get_damage_clips_count(state);
> +
> + /* Make sure damage clips are valid and inside the fb. */
> + while (num_clips > 0) {
> + if (clips->x1 >= clips->x2 ||
> + clips->y1 >= clips->y2 ||
> + clips->x1 < 0 ||
> + clips->y1 < 0 ||
> + clips->x2 > fb_width ||
> + clips->y2 > fb_height) {
> + drm_dbg_atomic(plane->dev,
> + "[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
> + plane->base.id, plane->name, clips->x1,
> + clips->y1, clips->x2, clips->y2);
> + return -EINVAL;
> + }
> + clips++;
> + num_clips--;
> + }
> +
> + return 0;
> +}
> +
> /**
> * drm_atomic_plane_check - check plane state
> * @old_plane_state: old plane state to check
> @@ -596,9 +666,6 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
> struct drm_plane *plane = new_plane_state->plane;
> struct drm_crtc *crtc = new_plane_state->crtc;
> const struct drm_framebuffer *fb = new_plane_state->fb;
> - unsigned int fb_width, fb_height;
> - struct drm_mode_rect *clips;
> - uint32_t num_clips;
> int ret;
>
> /* either *both* CRTC and FB must be set, or neither */
> @@ -625,17 +692,6 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
> return -EINVAL;
> }
>
> - /* Check whether this plane supports the fb pixel format. */
> - ret = drm_plane_check_pixel_format(plane, fb->format->format,
> - fb->modifier);
> - if (ret) {
> - drm_dbg_atomic(plane->dev,
> - "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n",
> - plane->base.id, plane->name,
> - &fb->format->format, fb->modifier);
> - return ret;
> - }
> -
> /* Give drivers some help against integer overflows */
> if (new_plane_state->crtc_w > INT_MAX ||
> new_plane_state->crtc_x > INT_MAX - (int32_t) new_plane_state->crtc_w ||
> @@ -649,49 +705,11 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
> return -ERANGE;
> }
>
> - fb_width = fb->width << 16;
> - fb_height = fb->height << 16;
>
> - /* Make sure source coordinates are inside the fb. */
> - if (new_plane_state->src_w > fb_width ||
> - new_plane_state->src_x > fb_width - new_plane_state->src_w ||
> - new_plane_state->src_h > fb_height ||
> - new_plane_state->src_y > fb_height - new_plane_state->src_h) {
> - drm_dbg_atomic(plane->dev,
> - "[PLANE:%d:%s] invalid source coordinates "
> - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
> - plane->base.id, plane->name,
> - new_plane_state->src_w >> 16,
> - ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
> - new_plane_state->src_h >> 16,
> - ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
> - new_plane_state->src_x >> 16,
> - ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
> - new_plane_state->src_y >> 16,
> - ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
> - fb->width, fb->height);
> - return -ENOSPC;
> - }
> -
> - clips = __drm_plane_get_damage_clips(new_plane_state);
> - num_clips = drm_plane_get_damage_clips_count(new_plane_state);
> -
> - /* Make sure damage clips are valid and inside the fb. */
> - while (num_clips > 0) {
> - if (clips->x1 >= clips->x2 ||
> - clips->y1 >= clips->y2 ||
> - clips->x1 < 0 ||
> - clips->y1 < 0 ||
> - clips->x2 > fb_width ||
> - clips->y2 > fb_height) {
> - drm_dbg_atomic(plane->dev,
> - "[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
> - plane->base.id, plane->name, clips->x1,
> - clips->y1, clips->x2, clips->y2);
> - return -EINVAL;
> - }
> - clips++;
> - num_clips--;
> + if (fb) {

This doesn't only move code, but also changes semantics, making the
checks optional if no FB is provided. Consider moving the condition to
the next patch. Otherwise LGTM.

> + ret = drm_atomic_check_fb(new_plane_state);
> + if (ret)
> + return ret;
> }
>
> if (plane_switching_crtc(old_plane_state, new_plane_state)) {
>

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-06-30 02:44    [W:0.209 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site