lkml.org 
[lkml]   [2023]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/3] PCI: qcom: ep: Add basic interconnect support
Date
Add basic support for managing "pcie-mem" interconnect path by setting
a low constraint before enabling clocks and updating it after the link
is up based on link speed and width the device got enumerated.

changes from v5:
- addressed the comments by mani.
changes from v4:
- rebased with linux-next.
- Added comments as suggested by mani.
- removed the arm: dts: qcom: sdx55: Add interconnect path
as that patch is already applied.
changes from v3:
- ran make DT_CHECKER_FLAGS=-m dt_binding_check and fixed
errors.
- Added macros in the qcom ep driver patch as suggested by Dmitry
changes from v2:
- changed the logic for getting speed and width as suggested
by bjorn.
- fixed compilation errors.


Krishna chaitanya chundru (3):
dt-bindings: PCI: qcom: ep: Add interconnects path
arm: dts: qcom: sdx65: Add PCIe interconnect path
PCI: qcom-ep: Add ICC bandwidth voting support

.../devicetree/bindings/pci/qcom,pcie-ep.yaml | 13 ++++
arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 3 +
drivers/pci/controller/dwc/pcie-qcom-ep.c | 72 +++++++++++++++++++++-
3 files changed, 87 insertions(+), 1 deletion(-)

--
2.7.4

\
 
 \ /
  Last update: 2023-06-28 04:20    [W:0.249 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site