lkml.org 
[lkml]   [2023]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] can: tcan4x5x: Introduce tcan4552/4553
Date
Hi everyone,

This series introduces two new chips tcan-4552 and tcan-4553. The
generic driver works in general but needs a few small changes. These are
caused by the removal of wake and state pins.

In v2 I updated the bindings to use tcan4x5x always as a fallback. The
driver now uses the first more specific binding if available. If the
given binding does not match the chip that is present, a warning is
printed and the correct driver data is loaded instead.

Based on v6.4-rc1.

Best,
Markus

Changes in v2:
- Update the binding documentation to specify tcan4552 and tcan4553 with
the tcan4x5x as fallback
- Update the driver to use auto detection as well. If compatible differs
from the ID2 register, use the ID2 register and print a warning.
- Small style changes

Previous versions:
v1 - https://lore.kernel.org/lkml/20230314151201.2317134-1-msp@baylibre.com

Markus Schneider-Pargmann (6):
dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
can: tcan4x5x: Remove reserved register 0x814 from writable table
can: tcan4x5x: Check size of mram configuration
can: tcan4x5x: Rename ID registers to match datasheet
can: tcan4x5x: Add support for tcan4552/4553
can: tcan4x5x: Add error messages in probe

.../devicetree/bindings/net/can/tcan4x5x.txt | 11 +-
drivers/net/can/m_can/m_can.c | 16 ++
drivers/net/can/m_can/m_can.h | 1 +
drivers/net/can/m_can/tcan4x5x-core.c | 161 ++++++++++++++----
drivers/net/can/m_can/tcan4x5x-regmap.c | 1 -
5 files changed, 155 insertions(+), 35 deletions(-)


base-commit: ac9a78681b921877518763ba0e89202254349d1b
--
2.40.1

\
 
 \ /
  Last update: 2023-06-21 11:33    [W:0.147 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site