lkml.org 
[lkml]   [2023]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] arm64: dts: qcom: apq8039-t2: remove superfluous "input-enable"
Date
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
commit c4a48b0df8bf ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8039-t2.dts | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
index 40644c242fb7..43686bbd87f4 100644
--- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts
+++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -366,7 +366,6 @@ typec_irq: typec-irq-state {
function = "gpio";
pins = "gpio107";
bias-pull-up;
- input-enable;
};
};

--
2.34.1
\
 
 \ /
  Last update: 2023-06-17 13:22    [W:0.085 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site